#40 Chain Connecting Link

Item Nbr. A1207

#40 Chain Offset Link

Item Nbr. A1208

BJ-126 Sprocket

Item Nbr. A1153  

This is a BJ126 final drive sprocket for an Albion lightweight transmission. it has 14 teeth and is for the #40 chain. This is the correct sprocket for a Rokon 2 wheel drive motorcycle. It can also be used on an older British motorcycle but it is too wide to work with a #41 chain.

9 Tooth Output Sprocket

Item Nbr. A1209

This is a brand new 9 tooth front or rear miter box output sprocket for a Rokon 2 wheel drive motorcycle. It has both a 3/16" wide keyway and a precision drilled 1/4" diameter hole. The bore is 3/4 inch. The sprocket is supplied with a new roll pin, 2 set screws and a #606 Woodruff key. Other tooth count sprockets are available. This sprocket is thin in the undercut area and was machined from a 5/8 inch bore sprocket because these are not available with a 3/4 inch bore. I do not reccomend using this sprocket in a high power application with just a roll pin. It should hold up just fine as long as it is used on a woodruff key that is long enough to get under the tooth area.

10 Tooth Output Sprocket

Item Nbr. A1210

This is a brand new 10 tooth front or rear miter box output sprocket for a Rokon 2 wheel drive motorcycle. It has both a 3/16" wide keyway and a precision drilled 1/4" diameter hole. The bore is 3/4 inch. The sprocket is supplied with a new roll pin, 2 set screws and a #606 Woodruff key. Other tooth count sprockets are available.

$18.00

11 Tooth Output Sprocket

Item Nbr. A1211

This is a brand new 11 tooth front or rear miter box output sprocket for a Rokon 2 wheel drive motorcycle. It has both a 3/16" wide keyway and a precision drilled 1/4" diameter hole. The bore is 3/4 inch. The sprocket is supplied with a new roll pin, 2 set screws and a #606 Woodruff key. Other tooth count sprockets are available.

12 Tooth Output Sprocket

Item Nbr. A1212

This is a brand new 12 tooth front or rear miter box output sprocket for a Rokon 2 wheel drive motorcycle. It has both a 3/16" wide keyway and a precision drilled 1/4" diameter hole. The bore is 3/4 inch. The sprocket is supplied with a new roll pin, 2 set screws and a #606 Woodruff key. Other tooth count sprockets are available.

13 Tooth Output Sprocket

Item Nbr. A1213

This is a brand new 13 tooth front or rear miter box output sprocket for a Rokon 2 wheel drive motorcycle. It has both a 3/16" wide keyway and a precision drilled 1/4" diameter hole. The bore is 3/4 inch. The sprocket is supplied with a new roll pin, 2 set screws and a #606 Woodruff key. Other tooth count sprockets are available.

14 Tooth Output Sprocket

Item Nbr. A1214

This is a brand new 14 tooth front or rear miter box output sprocket for a Rokon 2 wheel drive motorcycle. It has both a 3/16" wide keyway and a precision drilled 1/4" diameter hole. The bore is 3/4 inch. The sprocket is supplied with a new roll pin, 2 set screws and a #606 Woodruff key. Other tooth count sprockets are available.

19 Tooth Input Sprocket

Item Nbr. A1219

This is a brand new 19 tooth rear miter box input sprocket for a Rokon 2 wheel drive motorcycle with an Albion transmission. This is a higher than normal ratio sprocket for faster riding. It has both a 3/16" wide keyway and a precision drilled 1/4" diameter hole for mounting on an original shaft or on one of my extended rear miter box shafts. The sprocket is supplied with a new roll pin, 2 set screws and a #606 Woodruff key. Other tooth count sprockets are available.

23 Tooth Input Sprocket

Item Nbr. A1223

This is a brand new lightened 23 tooth rear miter box input sprocket for a Rokon 2 wheel drive motorcycle with an Albion Transmission. This is a higher than normal ratio sprocket for faster riding. It has both a 3/16" wide keyway and a precision 1/4" diameter hole for mounting on an orginal shaft or one of my extended miter box shafts. The sprocket is supplied with a new roll pin, 2 set screws and a number 606 woodruff key. Other tooth count sprockets are available.

24 Tooth Input Sprocket

Item Nbr. A1224

This is a brand new lightened 24 tooth rear miter box input sprocket for a Rokon 2 wheel drive motorcycle with an Albion Transmission. This ratio also works well with my Comet 30 clutch conversions. It has both a 3/16" wide keyway and a precision 1/4" diameter hole for mounting on an orginal shaft or one of my extended miter box shafts. The sprocket is supplied with a new roll pin, 2 set screws and a number 606 woodruff key. Other tooth count sprockets are available.

25 Tooth Input Sprocket

Item Nbr. A1225

This is a brand new lightened 25 tooth rear miter box input sprocket for a Rokon 2 wheel drive motorcycle with an Albion Transmission. This is a lower than normal ratio sprocket for slow speed riding. This ratio also works well with my Comet 30 clutch conversions. It has both a 3/16" wide keyway and a precision 1/4" diameter hole for mounting on an orginal shaft or one of my extended miter box shafts. The sprocket is supplied with a new roll pin, 2 set screws and a number 606 woodruff key. Other tooth count sprockets are available.

$39.00

26 Tooth Input Sprocket

Item Nbr. A1226

This is a brand new lightened 26 tooth rear miter box input sprocket for a Rokon 2 wheel drive motorcycle with an Albion Transmission. This is a lower than normal ratio sprocket for slow speed riding. This ratio also works well with my Comet 30 clutch conversions. It has both a 3/16" wide keyway and a precision 1/4" diameter hole for mounting on an orginal shaft or one of my extended miter box shafts. The sprocket is supplied with a new roll pin, 2 set screws and a number 606 woodruff key. Other tooth count sprockets are available.

28 Tooth Input Sprocket

Item Nbr. A1228

30 Tooth Input Sprocket

Item Nbr. A1230

60 Tooth 12" Drumwheel  Sprocket

Item Nbr. A1246

This is a new aftermarket 60 tooth sprocket for 12" drumwheels on Rokon motorcycles. It is made out of 6061-T6 aluminum and is machined for #40 chain.