 |
A-5 Ball Bearing
Item Nbr. A1150
This is a new A-5 ball-bearing that fits Albion 2 and 3 speed lightweight transmissions from 1931 to 1973. This is also correct for a Rokon or Nethercutt motorcycle that is equipped with an Albion 3 speed. |
$10.00
|
|
 |
Transmission Pulley Spacer
Item Nbr. A1239
This spacer goes outboard of the Albion pulley and is retained by a washer and a bolt. It is machined out of 1018 cold rolled steel and is .75" OD by 1.33" long. The pulley and input shaft are not included. This spacer is not used when the OE alternator is installed.
|
$8.00 |
|
 |
A14 Lock Nut
(used)
Item Nbr. A1151
|
$10.00
Out of Stock |
|
 |
BJ-5 Bushing (threaded)
Item Nbr. A1152
This is a BJ-5 Mainshaft Bushing for 2 speed "BJ" transmissions (threaded). This new bushing is threaded for a 3/8-24UNF adjuster |
$16.00
(per bushing) |
|
 |
BJ-5 Bushing
Item Nbr. A1102
This is a BJ-5 Mainshaft Bushing for 2 speed "BJ" transmissions. This new bushing is NOT threaded for an adjuster |
$16.00
(per bushing) |
|
 |
BJ126 Sprocket
Item Nbr. A1153
This is a BJ126 output sprocket for an Albion lightweight transmission. it has 14 teeth and is for the #40 chain. This is the correct sprocket for a Rokon 2 wheel drive motorcycle. It can also be used on an older British motorcycle but it is too wide to work with a #41 chain. |
$40.00 |
|
 |
EJ 5 Layshaft Gear (used)
Item Nbr. A1154
Quantities limited |
$ 20.00 |
|
 |
EJ 6 Layshaft (used)
Item Nbr. A1155
Quantities limited |
$25.00 |
|
 |
EJ 8 Mainshaft Gear (used)
Item Nbr. A1156
Quantities limited |
$ 20.00 |
|
|
 |
EJ 30 Kickstart Bushing
Item Nbr. A1157 |
$8.00 |
|
 |
EJ34a Kickstart Shaft Distance Tube
Item Nbr. A1158
This is a used kickstart shaft distance tube for a Rokon motorcycle. |
$20.00 |
|
 |
A35/1 Oil Seal
Item Nbr. A1159
This is a new A35/1 oil seal for later Albion 2 and 3 speed lightweight transmissions. It will not fit the early models that used felt washers without some machining of the housing. |
$5.00 |
|
 |
BJ16, BJ17 and BJ18 Detent Plunger Parts
Item Nbr. A1160-61-62
This is a used set of the BJ16, BJ17, and BJ18 detent plunger parts for a 2 or 3 speed Albion lightweight gearbox.
Quantities Limited |
$30.00 |
|
 |
EJ-7 Bushing
Item Nbr. A1163
This is a new EJ-7 bushing for an Albion 3 speed gearbox. This will also work as a BJ 6 in an Albion 2 speed gearbox. |
$6.00 |
|
|
 |
EJ-13 Bushing
Item Nbr. A1100
This is a new EJ-13 mainshaft endplay bushing for an Albion lightweight 3 speed transmission. It fits Albion lightweight transmissions built from 1931 to 1973. This is the bushing that is prone to failure on Rokon motorcycles that were built in the 1960s and 1970s. It is supplied with a 3/8-24 UNF set screw and locknut. |
$16.00 |
|
|
 |
BJ-23 Filler Plug Rokon (used)
Item Nbr. A1164
Quantities Limited |
$7.50 |
|
 |
EJ 16 Operator Fork (used)
Item Nbr. A1165
Quantities Limited |
$15.00 |
|
 |
#405 Woodruff Key
Item Nbr. A1166 |
$ 0.25 |
|
 |
Face Seal
Item Nbr. A1167
This is a face seal that will reduce or stop the common oil leak on an Albion 3 speed gearbox. |
$ 8.00 |
|
 |
Kickstart Eliminator Bushing
Item Nbr. A1101
This is a CNC machined bronze bushing designed to replace the kickstart assembly in an Albion transmission in a Rokon motorcycle. It has a press fit in the Albion side cover. There is also an endplay adjuster for the transmission countershaft. The transmision and or side cover are not included. |
$ 35.00
|
|
 |
Albion Sprocket Spacer
Item Nbr. A1240
These 2 shims are the correct 1/16" thickness to replace the original sprocket spacer that is many times missing in the lightweight transmissions. Dimensions are 20mm ID X 28mm OD X 1.5mm thick. |
$ 4.00 |
|
